400W 24V IP67 DALI-2 Himmennettävä LED Driver

ALCV400 LED MUUNTAJA SARJA - ALCV400-024-67-DALI

DALI HIMMENNETTÄVÄ IP67 VAKIOJÄNNITE LED DRIVER

OMINAISUUDET

• IP67 luokiteltu
• DALI-2 himmennettävä
• Korkea hyötusuhde 93%
• Aktiivinen PFC (Power Factor Correction)
• Universaali AC tulojännitealue 90 ~ 305Vac
• Jäähdytys vapaan ilman konvektiolla (Metallikotelo)
• Valmiustilan tehonkulutus < 0.5W @ 230Vac
• Lähtö- ja himmennyslinjat ovat uusien määräysten mukaisia eristyksellä
• Suojaukset: OVP / OCP / SCP / OTP

KÄYTTÖKOHTEET

• Voidaan käyttää 24V valonlähteiden kanssa, esim. LED-nauhat (aLED KIDEFLEX)
• Sisä- ja ulkotiloihin, IP67

IP luokitus

IP67

Teknsiset tiedot

Output

• DC Voltage: 24V
• Rated Current: 0~16.7A
• Rated Power: 400.8W
• Ripple&Noise(Max.) Note.2: 350mV
• Efficiency at 230VAC (Typ.): 93%
• Voltage Tolerance Note.3: ± 5%
• PWM DImming (optional): > 1600 Hz (for dimmable version)
• Set up time (Max.): 0.7s / 230VAC, at full load

Input

• Rated Voltage 100 ~ 277VAC
  
• Voltage Range 90 ~ 305VAC
  
• Frequency Range 47 Hz ~ 63 Hz
  
• AC Current (Max.) 4.5A at 115VAC / 2.3A at 230VAC
  
0.98 at 115VAC / >0.94 at 230VAC at full load. PF-0.9 at 70% load

• Total Harmonic Distortion THD < 15% at 230VAC, full load. Note 4
  
• Inrush Current (Typ.) Cold Start 90A (Td=960us measured at 50% Ipeak) at 230VAC
  
• Max. Number of PSUs on Circuit Breaker
  B type : 1 unit (10A) / 1 unit (16A) / 2 units (25A),
  C type : 1 unit (10A) / 3 units (16A) / 4 units (25A),
  D type : 3 units (10A) / 6 units (16A) / 9 units (25A) at 230VAC

DIM. Control (DALI)

• DALI2 Standards Compatibility with IEC 62386-101, 102, and 207
  
• DALI bus current consumption < 2mA

Protections

• Over Current 105~180% rated current. Type: Hiccup mode (Auto recover after fault condition disappeared).
  
• Short Circuit Type: Hiccup mode & recovers after fault condition disappeared.
  
• Over Voltage 26~38V, Type: Hiccup mode (re-power on to recover).
  
• Over Temperature Tcase: 95°C ± 10°C, Type: Latch off mode (re-power on to recover).

Environment

• Operation Temp. -30°C ~50°C (Refer to output load derating curve).
  
• Operation Humidity 20% ~ 90% RH non-condensing.
  
• Storage Temp. -40 ~ +80°C
  
• Storage Humidity 10% ~ 90% RH
  
• Vibration 10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes.

DIMENSIONS

• Lenght: 300mm
• Width: 98mm
• Height: 38.5mm
• Weight: 1308g

SAFETY

• Safety Standards EN61347-1,EN61347-2-13, independent, IP67 Approved.
  
• Withstand Voltage I/P-O/P: 3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
  
• Isolation Resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms / 500VDC at 25°C
  
• EMI Conduction & Radiation Compliance to EN55015,FCC part 15
  
• Harmonic Current Compliance to EN61000-3-2 Class C(≥75% load),EN61000-3-3
  
• EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547,criteria B

NOTES

1. All specifications not specially mentioned are measured at 230VAC full load and 25°C ambient temperature.
2. Ripple & Noise are measured at 20MHz bandwidth by using a 12” twisted pair-wire terminated with 0.1uf & 47uf parallel capacitor.
3. Voltage Tolerance: includes line regulation, load regulation and set-up tolerance.
4. THD < 25% at 277VAC, full load.