DRIVER 200W 24V

• Efficiency up to 93%
• Input voltage range: 100-277VAC; THD <15%
• The output voltage can be conveniently adjusted via the potentiometer, simplifying the inventory management
• Surge protection: L-N: 6KV; L/N-GND 8KV
• All-round protections: over voltage protection, short circuit protection, over temperature protection and IP67
• Flicker free; percent flicker ≤0.5%
• 5yrs warranty (please refer to the warranty condition.)

LF-GOE200YV024A is a 200W constant voltage LED power supply, specifically designed for outdoor lighting, flood
light and landscape lighting. Rated input voltage: 100-277VAC (limit: 90-305V). Super high efficiency and excellent
heat-dissipation properties of this product help to extend the product lifetime. It also has ultra high power factor
and extremely low THD.

All-round protections including surge protection, over voltage protection, short circuit protection and over
temperature protection greatly improve the product stability.
The output voltage can be conveniently adjusted via the potentiometer at the bottom of the driver so as to meet
diverse demands.

IP luokitus

IP67

Output Voltage 22.08-25.92Vdc (Adjusted via the potentiometer)
Output Current 8.34A max.@200-277Vac; 6.25A max.@100-277Vac
Output Power 200W max.@200-277Vac; 150W max.@100-277Vac
Default Setting 24Vdc
Percent Flicker (Modulation Depth) ≤0.5% @ 50Hz or 60Hz
Ripple Voltage ≤10% @ 50Hz
Voltage Tolerance ±2.5%
Temperature Drift ±10% / 25-60℃
Start-up Time <1S @ 120VAC; <0.5S @ 230VAC

Rated Input Voltage 100-277Vac (limit: 90-305Vac)
DC Input Voltage 141-391Vdc (limit: 127-431Vdc)
Input Frequency Range 47-63Hz
Input Current 2.0A Maximum
Power Factor ≥0.97/100VAC @full load; ≥0.95/230VAC @full load; ≥0.90/277VAC @full load
THD ≤15%
Efficiency ≥88%/100VAC @full load; ≥92%/230VAC @full load; ≥93%/277VAC @full load
Inrush Current ≤80A & 500uS
Leakage Current ≤0.7mA
Standby Power Consumption ≤1.5W

Surge Protection L-N: 6KV; L/N-GND: 8KV
Short-Circuit Hiccup mode (auto-recovery)
Over Voltage ≤35V (disconnect output voltage; auto-recovery)
Over Current ≤150% (auto-recovery)

Working Temperature -40℃ ~ +60℃
Working Humidity 20-90%RH (no condensation)
Storage Temperature/Humidity -40℃ ~ +80℃ (six months under class I environment); 10-90%RH (no condensation)
Atmospheric Pressure 86KPa-106KPa

Certificate TUV-ENEC, CCC, CE, RCM, UL(Class P), CCC, SAA, CB
Withstand Voltage I/P-O/P: 3.75KV, 5mA, 60s; I/P-FG: 1.5kV 5mA 60S;O/P-FG: 0.5kV 5mA 60S
Insulation Resistance I/P-O/P: >100MΩ@500VDC
Safety Standard ENEC: EN61347-1:2015, EN 61347-2-13:2014/A1:2017, EN 62384: 2016/A1:2009 CE-LVD: EN 61347-2-13:2014/A1:2017, EN 61347-1:2015, EN 62493:2015 CB: IEC 61347-1:2015, IE61347-2-3:2014, IEC 61347-2- 13:2014/AMD1:2016 RCM: AS 61347.2-13:2018 CCC: GB19510.1-2009, GB19510.14-2009 UL: UL8750, CSA 250.13
EMI CE-EMC/RCM: EN55015, EN61000-3-2, EN61000-3-3 CCC: GB/T17743, GB17625.1, GB17625.2 FCC: PART 15B
EMS CE-EMC/RCM: EN61000-4-2,3,4,5,6,11 CCC: GB/T17626.2,3,4,5,6,11
EFTB 2.2KV (Class B)
Ringing wave 2.5KV (Class B)
Electrostatic Discharge (ESD) Air 8KV; touch 4KV (Class B)

IP Rating IP67
RoHS RoHS 2.0 (EU) 2015 / 863
Warranty Condition 5 years (Tc≤72 ℃)
Noise Rating ≤20db (Tested in a soundproof room and the noise collector was 10cm away from the driver.)